[EA5FUZ]

Hi i'm EA5FUZ I feel sad, I did all the installation files LAV, but still not working can you can help me? a greeting

[url][URL=https://imageshack.com/i/mu12icj][/url] [/url]

[url][URL=https://imageshack.com/i/mkftj8j][/url] [/url]

[F6DZP]

Hello,

Your LAV filters are well installed: Your LAV splitter led is Green.

You cannot play the TS file because I suppose it is not in the directory where is CheckTutiouneDriverAndFilters:
the software search for a file called "F6DZP_TEST.TS" , this file must be in the same directory.

If you want to play another TS file, just rename it with this name.

Jean Pierre F6DZP

[EA5FUZ]

Hello,

Your LAV filters are well installed: Your LAV splitter led is Green.

You cannot play the TS file because I suppose it is not in the directory where is CheckTutiouneDriverAndFilters:
the software search for a file called "F6DZP_TEST.TS" , this file must be in the same directory.

If you want to play another TS file, just rename it with this name.

Jean Pierre F6DZP

Hi, Problem solved, however do not see any sign of the ISS that problem I have? How do I have to configure the software?

[url][URL=https://imageshack.com/i/jm6lwlj][/url] [/url]


not receive this morning signal from ISS hamtv blank transmissions,thanks.

[url][URL=https://imageshack.com/i/nmqswqj][/url] [/url]

[F6DZP]

at the right of Tutioune you have the ISS little square to set.

Tutioune1600 setup 3 buttons ON.jpg (58.78 KiB) Viewed 51719 times

and you forgot to:
- set FEC only for 1/2
- give more BBgain (14dB for example)
- set AGC PostNyquist speed compensation to 4
..

look at this subject:
http://www.vivadatv.org/viewtopic.php?f=66&t=285

Jean Pierre F6DZP

[EA5FUZ]

at the right of Tutioune you have the ISS little square to set.

Tutioune1600 setup 3 buttons ON.jpg

and you forgot to:
- set FEC only for 1/2
- give more BBgain (14dB for example)
- set AGC PostNyquist speed compensation to 4
..

look at this subject:
http://www.vivadatv.org/viewtopic.php?f=66&t=285

Jean Pierre F6DZP

oK SET the parameters,one question.THE OFFSET IS TO BE AT 0?

[F6DZP]

I don't understand which Offset you talk about.

Jean Pierre F6DZP

[EA5FUZ]

I don't understand which Offset you talk about.

Jean Pierre F6DZP

setting offset 0 or 9165?

in this moment setting 0

[url][URL=https://imageshack.com/i/nb78wxj][/url] [/url]

[EA5FUZ]

I don't understand which Offset you talk about.

Jean Pierre F6DZP

setting offset 0 or 9165?

in this moment setting 0

[url][URL=https://imageshack.com/i/nb78wxj][/url] [/url]

this is my downconverter http://www.spectra-bv.nl/downconverter.html what is number offset for this converter? thanks

[F6DZP]

Hello

If I look at your down converter specification I see :
"Input Freq. range 2320 - 2600 MHz, Output 1320 - 1600 MHz "

so your Offset is 1000 MHZ as 2320 MHz become 1320 MHz

you should give 01000000 to Tutioune for Offset

Jean Pierre F6DZP

[EA5FUZ]

Hello

If I look at your down converter specification I see :
"Input Freq. range 2320 - 2600 MHz, Output 1320 - 1600 MHz "

so your Offset is 1000 MHZ as 2320 MHz become 1320 MHz

you should give 01000000 to Tutioune for Offset

Jean Pierre F6DZP

Perfect.. is this correct now? the parameters SCAN MODE,ERROR/EVENT etc ...all correct? is the grey screen normal?

[url][URL=https://imageshack.com/i/jjnu2pj][/url] [/url]

[url][URL=https://imageshack.com/i/nb1h0jj][/url] [/url]