Logiciels pour MiniTiounerPro utilisant les 2 tuners ou démodulateurs du NIM FTS434/4335
Software for MiniTiounerPro using the 2tuners or demodulators of NIM FTS4334/4335

Re: Scan&Tioune

Messagede F1EJP » Mar 17 Nov 2020 09:10

Bonjour Jean-Pierre
Est-ce normal d'avoir le rapport signal/bruit > à "-" 2.35 dB ?
Je ne l'ai eu que sur cette station
Cordialement
Capture d’écran 2020-11-17 100238.jpg
Capture d’écran 2020-11-17 100238.jpg (90.8 Kio) Vu 9518 fois
F1EJP
 
Messages: 107
Inscription: 13 Mar 2018

Re: Scan&Tioune

Messagede F6DZP » Mar 17 Nov 2020 17:05

Oui c'est normal, en DVB-S2 QPSk avec un Fec 1/4 il faut avoir un signal avec un C/N supérieur à -2,35 dB pour le recevoir.
Il y a tellement de correction que l'on peut recevoir un signal avec un C/N négatif.
ce n'est pas un bug ....

c'est sans doute une station QRP qui voulait être sûre d'être reçue et qui a donc réglé cette valeur de FEC. (du coup il reste moins de place pour la vidéo)
du coup ton report était D5, soit environ 5dB au dessus du seuil de réception.

C'est quand même pas mal le numérique!

Jean-Pierre F6DZP
F6DZP
 
Messages: 1129
Inscription: 24 Déc 2010

Re: Scan&Tioune

Messagede F1EJP » Mar 17 Nov 2020 20:53

Merci pour tes explications très claires !
Comme tu dis le numérique c'est pal mal et très intéressant à expérimenter !

Pour l'instant pas de nouveau bug constaté.
j'ai juste été surpris, par rapport aux autres versions, de voir la prise de cliché en miniature apparaître pour la transmission WEB du TiouneMonitor

Peut-on régler par défaut dans le fichier ini l'ofset du scan que l'on doit régler avec le curseur ?

En tout cas cette version me semble très aboutie !

73 Dominique
F1EJP
 
Messages: 107
Inscription: 13 Mar 2018

Re: Scan&Tioune

Messagede F6DZP » Mer 18 Nov 2020 05:12

Bonjour,

oui, pour chaque type de scan QO100 (Full, Mixed, etc..) on peut régler dans le fichier .ini la position Y du spectre dans le graphique

Pour le bouton FULL il y a:
Btn1QO100_YScanPosition=44

Pour le bouton, Mixed il y a:
Btn2QO100_YScanPosition=48

etc

Comme cela chacun peut adapter la position du graphique du spectre suivant son LNB.

Jean-Pierre F6DZP
F6DZP
 
Messages: 1129
Inscription: 24 Déc 2010

Re: Scan&Tioune

Messagede ik8xld » Dim 24 Jan 2021 22:38

Good morning, JP,
Thanks for the new Scan & Tioune 0.2k, really good !
I would like to ask you if it is possible to have memory buttons for the scanner as well.
It may be very convenient to quickly set the frequency and offset relative to the scanner.

Thanks
Fichiers joints
1.JPG
1.JPG (27.23 Kio) Vu 9219 fois
ik8xld
 
Messages: 7
Inscription: 15 Fév 2019

Re: Scan&Tioune

Messagede F6DZP » Lun 25 Jan 2021 12:34

Hello,
I don't understand your question.

In the .ini file you can change as you want the values of each button:

You have:

ScannerQO100PresetButtons]
; setup for QO100 preset buttons: FULL, Mixed, Simplex, RBTV, RB1, RB2
;------------------------------------------------------------
; QO100 scan button1 : FULL
; valeur en kHz / Value in khz >>> 8 DIGITS
Btn1QO100FreqValue=10495000
; Standard Satellite LNB offset
;Btn1QO100FreqOffset=-09750000
; My LNB offset
;Btn1QO100FreqOffset=-09749900
; offset with PLL LNBpro
Btn1QO100FreqOffset=-09749997
; inscription sur le bouton / button inscription
Btn1QO100Text=FULL
Btn1QO100Fplug=A
Btn1QO100LNBvoltage=18
Btn1QO100_22kHz=Off
Btn1QO100_YScanPosition=44
Btn1QO100scanwidthkHz = 9500
;.......................................
; QO100 scan button2 : Mixed
Btn2QO100FreqValue=10495900
; Standard Satellite LNB offset
;Btn2QO100FreqOffset=-09750000
; My LNB offset
;Btn2QO100FreqOffset=-09749900
; offset with PLL LNBpro
Btn2QO100FreqOffset=-09749997
; inscription sur le bouton / button inscription
Btn2QO100Text=Mixed
Btn2QO100Fplug=A
Btn2QO100LNBvoltage=18
Btn2QO100_22kHz=Off
Btn2QO100_YScanPosition=48
Btn2QO100scanwidthkHz = 7500

........


and you have

[ScannerFreqPresetButtons]
; Frequency for Scanner
;------------------------------------------------------------
; FULL QO100 scan
; valeur en kHz / Value in khz >>> 8 DIGITS
scanFreq1Value=10495900
; offset with my DRO LNB
;scanFreq1Offset=-09748870
; offset with PLL LNBpro
scanFreq1Offset=-09749997
; LNB Chatel
;scanFreq1Offset=-09749903
; inscription sur le bouton / button inscription
scanFreq1Text=10495900kHz
scanFreq1Fplug=A
scanFreq1LNBvoltage=18
scanFreq1_22kHz=Off
scanFreq1_YScanPosition=48
;.......................................
scanFreq2Value=10495000
; Standard Satellite LNB offset
scanFreq2Offset=-09749997
; LNB Chatel
;scanFreq2Offset=-09749903
scanFreq2Doppler=no
scanFreq2Text=10495300kHz
scanFreq2Fplug=A
scanFreq2LNBvoltage=18
scanFreq2_22kHz=Off
scanFreq2_YScanPosition=49

.........................


and you have

[ScanWidthButtons]
;.......................................
; mettre la largeur de scan en kHz maxi 16000
; scanwidth max value 16000
ScanWidth1=7500
ScanWidth2=4000
ScanWidth3=3000
ScanWidth4=9000
ScanWidth5=12000
ScanWidth6=16000

I don't see what you need?

Jean-Pierre F6DZP
F6DZP
 
Messages: 1129
Inscription: 24 Déc 2010

Re: Scan&Tioune

Messagede ik8xld » Mar 26 Jan 2021 02:18

Hi JP,
my request for additional memory buttons to set the frequency and other scanner parameters, referred to use on other bands (for example), not qo-100.
For example if you wanted to quickly set the scanner to 1280 MHz or 2400 mhz, without offset, etc, etc.
It would also be very useful in portable use.
I understand we could also use those keys you mentioned but they are very useful to use on qo-100.
ik8xld
 
Messages: 7
Inscription: 15 Fév 2019

Scan&Tioune 02K bug?

Messagede IK1IYU » Mer 27 Jan 2021 22:36

Hello Jean-Pierre,
I think to have found a bug in the last beta 02k of Scan&Tioune.
In my setup I use the B port of MiniTiouner-PRO2 for QO-100 reception.
All parameters are set ok into the .ini file (port=B, voltage=18V, 22KHz=off).

But, when the program start, the voltage on port B is switched to 13V and I can visually see that on the MiniTiouner LED...I must manually switch between 0V and back to 18V to start correct reception of the QO-100 beacon signal.
After that, every time I try to lock on a different signal on the spectrum (manually or automatically) the program switch back to 13V, and I have to repeat the manual switch between 0V and 18V.

All the previous versions still works without problem in the same configuration, so I think there is something wrong in the 02k.

I have not tried to change my settings to port A of the MiniTiouner-PRO2, but I believe that most users has that port set by default in the .ini file and anyone has reported my problem.

Thank you for the attention and for your excellent work.

73 de Piero, IK1IYU
IK1IYU
 
Messages: 6
Inscription: 30 Aoû 2019

Re: Scan&Tioune 02K bug?

Messagede IK1IYU » Ven 29 Jan 2021 21:11

In the meantime I have tried to change the configuration using plug A and as supposed it works perfectly!
So I can confirm the problem is relative only to plug B.

73 de Piero, IK1IYU
IK1IYU
 
Messages: 6
Inscription: 30 Aoû 2019

Re: Scan&Tioune

Messagede F6DZP » Lun 1 Fév 2021 05:45

Hello Piero,

Thank you for having detected this issue.

Effectively,
- if we have asked in the .ini to use Fplug A and set the voltage to be 18v , the result when we start Scan&Tioune is: Fplug A and 18v selected , and the real voltage on Fplug A is 18v => GOOD
- if we have asked in the .ini to use Fplug B and set the voltage to be 18v , the result when we start Scan&Tioune is: Fplug B and 18v selected , but the real voltage on Fplug B is 13v => BAD
( I have not detected that bad voltage because my LNB has no polar change possibility and is always powered by 13v)
( and , yes , most of time I use only Fplug A)

So the problem is only for Plug B voltage.

I will fix that in the next version

Thank you again. You are a good beta tester!

Jean-Pierre F6DZP
F6DZP
 
Messages: 1129
Inscription: 24 Déc 2010

PrécédenteSuivante
Forums Statistiques

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 1 invité

Options

Retourner vers MinitiounePro / Scan&Tioune / DualTioune