Double receiver DVB-S/S2 144Mhz-2450Mhz
build it yourself or buy a complete MiniTiounerPro already built for less than 100 euros

Re: Display connection

Postby ik8ozv » Wed 13 Nov 2019 20:54

F6DZP wrote:You can test your disply using the software "TestMyMinTiouner"

Jean-Pierre F6DZP


Yes Jean-Pierre, it worked.
Merci

Thanks also to Lars
MinitunerPro2, NIM: FTS4334; Parabole 100cm Offset, LNB Octagon Green.
PC= I9 / Win10-64bits.
IK8OZV
ik8ozv
 
Posts: 36
Joined: 04 Aug 2019

Re: Display connection

Postby ik8ozv » Sat 25 Jan 2020 12:17

F6DZP wrote:You can test your disply using the software "TestMyMinTiouner"

Jean-Pierre F6DZP


Hello Jean-Pierre and all,
i have tried the Digole Display with the "TestMyMiniTiouner_V2_0" program
as suggested me from Jean-Pierre but i have noticed that i do not see it verry good.
As you can see in the posted picture the write "TUNER" is not shown free but there
is the write"MER: 10dB" hides the TUNER write.
Please what could it be?
How to fix it properly?
Thanks
Enzo IK8OZV
Attachments
IMG_3491.jpg
IMG_3491.jpg (59.29 KiB) Viewed 1987 times
MinitunerPro2, NIM: FTS4334; Parabole 100cm Offset, LNB Octagon Green.
PC= I9 / Win10-64bits.
IK8OZV
ik8ozv
 
Posts: 36
Joined: 04 Aug 2019

Re: Display connection

Postby IK1IYU » Sun 26 Jan 2020 21:43

Hello all,
I have the same display problem…

73 de Piero, IK1IYU

IMG_20200126_215340.jpg
IMG_20200126_215340.jpg (305.45 KiB) Viewed 1933 times
IK1IYU
 
Posts: 4
Joined: 30 Aug 2019

Re: Display connection

Postby F6DZP » Mon 27 Jan 2020 06:07

Hello,
I can say nothing as you say nothing.
is it a 2.4" or a 2.6" or ???
which button do you use for the test?

Jean-Pierre F6DZP
F6DZP
 
Posts: 1032
Joined: 24 Dec 2010

Re: Display connection

Postby ik8ozv » Mon 27 Jan 2020 06:29

Hello Jean-Pierre.
It is a 2.6 one
Thanks
Enzo
MinitunerPro2, NIM: FTS4334; Parabole 100cm Offset, LNB Octagon Green.
PC= I9 / Win10-64bits.
IK8OZV
ik8ozv
 
Posts: 36
Joined: 04 Aug 2019

Re: Display connection

Postby F6DZP » Mon 27 Jan 2020 18:01

Hello,

OK I have the same problem with the test software. I Will fix that. sorry for the inconvenience.
but the Digole 2.6" works well using Minitioune. This issue is only with the test software.

Jean-Pierre
F6DZP
 
Posts: 1032
Joined: 24 Dec 2010

Re: Display connection

Postby ik8ozv » Mon 27 Jan 2020 20:05

Hello Jean-Pierre,
Thanks for the Fix.
please how do we know when the software is fixed?
Will you post an advice when ready?
Merci.
73's de Enzo IK8OZV
MinitunerPro2, NIM: FTS4334; Parabole 100cm Offset, LNB Octagon Green.
PC= I9 / Win10-64bits.
IK8OZV
ik8ozv
 
Posts: 36
Joined: 04 Aug 2019

Re: Display connection

Postby IK1IYU » Mon 27 Jan 2020 23:47

Merci Jean-Pierre,
Yes, with Minitioune all is ok.
73 de Piero, IK1IYU
IK1IYU
 
Posts: 4
Joined: 30 Aug 2019

Re: Display connection

Postby F6DZP » Tue 28 Jan 2020 05:02

The zoom factor is too much in the test software, so all lines cannot fit in one screen so the last lines start again at the top of the screen and erase part of the screen...

it will be fixed in the next release of all tools.

Jean-Pierre F6DZP
F6DZP
 
Posts: 1032
Joined: 24 Dec 2010

Re: Display connection

Postby ik8ozv » Wed 29 Jan 2020 09:41

Hi Jean-Pierre,
Please when will it be released?
Merci
Enzo IK8OZV
MinitunerPro2, NIM: FTS4334; Parabole 100cm Offset, LNB Octagon Green.
PC= I9 / Win10-64bits.
IK8OZV
ik8ozv
 
Posts: 36
Joined: 04 Aug 2019

Previous
Forum Statistics

Who is online

Users browsing this forum: No registered users and 1 guest

Options

Return to MiniTiouner Pro

cron