Double receiver DVB-S/S2 144Mhz-2450Mhz
build it yourself or buy a complete MiniTiounerPro already built for less than 100 euros

Assembly and pinout

Messagede G8NOP » Lun 8 Juil 2019 15:23

Hi,
I received my MinitiounerPro with no problems... thank you.

I was wondering if anyone who has built a project around the board has a diagram of the pinouts?
I have seen the NIM mounted both under and over the main board and I am looking for assembly examples.
Thank you in anticipation.
G8NOP
 
Messages: 4
Inscription: 24 Mar 2019

Re: Assembly and pinout

Messagede M5TXJ » Lun 8 Juil 2019 18:07

Hi (insert name)
I just used the downloads on the R-E-F shop page, I know they're V1 but they're near enough to use when you refer to the new block diagram in this forum.
73 Dave G8TXJ/M5TXJ
M5TXJ
 
Messages: 20
Inscription: 03 Juil 2017

Re: Assembly and pinout

Messagede F6DZP » Mar 9 Juil 2019 05:10

Hello,

Complete MiniTiounerPro V2 shematics are here : http://www.vivadatv.org/viewtopic.php?f=82&t=648

Jean-Pierre F6DZP
Dernière édition par F6DZP le Mar 9 Juil 2019 20:37, édité 1 fois.
F6DZP
 
Messages: 1129
Inscription: 24 Déc 2010

Re: Assembly and pinout

Messagede G8NOP » Mar 9 Juil 2019 16:29

Thank you for the advice 73
G8NOP
 
Messages: 4
Inscription: 24 Mar 2019

Re: Assembly and pinout

Messagede F1CHF » Lun 28 Mar 2022 15:11

allez mon bon jean pierre .....
va falloir jouer du DELETE USER qui va pas bien !
hi
le chf
F1CHF at FREE.FR
73's
F1CHF
 
Messages: 64
Inscription: 29 Déc 2010

Forums Statistiques

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 8 invités

Options

Retourner vers MiniTiouner Pro

cron