Bonjour JP
Dans le cas d'une utilisation en portable par exemple, de SCANANDTIOUNE, sans réseau ni WIFI quel est la config du fichier ini pour avoir le visu sur VL.
Merci d'avance pour ta réponse 73.
Patrick
If I put this in the .INI
###########################################
; adresse UDP utilisée pour envoyer le TS à VLC
; UDP address used to send TS to VLC
Conf_AddrUDP=172.24.53.211
Conf_Port=9001
Conf_LocalIP=172.24.53.211
###########################################
With this I can see the Video in Scan And Tioune
but no Video in VLC player with the setting udp://@172.24.53.211:9001.
So the question is now for me what would be the right setting under.
So what I do not understand is why the 232.0.0.12 shall be a multicast address.
Host Extensions for IP Multicasting [RFC1112] specifies the extensions
required of a host implementation of the Internet Protocol (IP) to
support multicasting. The multicast addresses are in the range
224.0.0.0 through 239.255.255.255. Address assignments are listed below.
The range of addresses between 224.0.0.0 and 224.0.0.255, inclusive,
is reserved for the use of routing protocols and other low-level
topology discovery or maintenance protocols, such as gateway discovery
and group membership reporting. Multicast routers should not forward
any multicast datagram with destination addresses in this range,
regardless of its TTL.
Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 5 invités