Logiciels pour MiniTiounerPro utilisant les 2 tuners ou démodulateurs du NIM FTS434/4335
Software for MiniTiounerPro using the 2tuners or demodulators of NIM FTS4334/4335

Re: Scan&Tioune

Messagede ik8xld » Sam 27 Juin 2020 11:04

Hi Jean Pierre,
I tried to enable the SRHelp BUTTON in scan & Tioune config file, but it doesn't seem to work.
I have also tried unsuccessfully to have the scanner automatically started but I have not found the right setting.

73 Rocco IK8XLD
ik8xld
 
Messages: 7
Inscription: 15 Fév 2019

Re: Scan&Tioune

Messagede F6DZP » Jeu 22 Oct 2020 05:44

Hello,
Yes Rocco, you are rigth, some setup cannot be done with this version.

The new version 0.2 can do that now and many things more.
Scan is also faster, uses les CPU%, scanner is automatically started and Web Monitor can be used

La nouvelle version de Scan&Tioune est beaucoup plus rapide utilise moins de %CPU
on Peut utiliser le Web Monitor pour envoyer des photos ou le graphique du sacnner.

Scan&Tioune02f_sending photo.jpg
Scan&Tioune02f_sending photo.jpg (411.52 Kio) Vu 10534 fois

TiouneMonitor receiving photo and report from Scan&Tioune02f.jpg
TiouneMonitor receiving photo and report from Scan&Tioune02f.jpg (156.2 Kio) Vu 10534 fois
Hello,

You can also send the graphic of present scan (and when video is not present the scan graphic is sent)
Scan&Tioune02f_sending scan.jpg
Scan&Tioune02f_sending scan.jpg (410.28 Kio) Vu 10534 fois

TiouneMonitor receiving graphic scan and report from Scan&Tioune02f.jpg
TiouneMonitor receiving graphic scan and report from Scan&Tioune02f.jpg (141.47 Kio) Vu 10534 fois


Bientôt disponible au téléchargement

available very soon.

Jean-Pierre F6DZP
F6DZP
 
Messages: 1129
Inscription: 24 Déc 2010

Re: Scan&Tioune

Messagede F6DZP » Jeu 22 Oct 2020 05:59

Suite

Si vous avez plusieurs MiniTiouners (V2 ou Pro ou Express ou S) vous pouvez lancer plusieurs instances de Scan&Tioune en simultané, l'adresse du port UDP sera décalée automatiquement à chaque instance.

If you have several MiniTiouners (V2 or Pro or Express or S) you can launch several instances of Scan & Tioune simultaneously, the UDP port address will be automatically shifted for each instance.

Fonctionne maintenant avec tous les MiniTiouners y compris le MiniTiouner Express
Now works with all MiniTiouners including the MiniTiouner Express

Scan&Tioune02f_2 instances receiving simultaneaously.jpg
Scan&Tioune02f_2 instances receiving simultaneaously.jpg (699.77 Kio) Vu 10533 fois


Temqp d'un scan en mode fin : environ 10 sec
Time of a scan in Fine mode : about 10 sec


Jean-Pierre F6DZP
F6DZP
 
Messages: 1129
Inscription: 24 Déc 2010

Re: Scan&Tioune

Messagede F6DZP » Mer 28 Oct 2020 06:46

Yes you can use the media player.
You have just to stop the UDP stream and it will be available.

The Video cannot be played at same time from the receiver stream and from hard disk file.

So, when UDP is ON, the video displayed comes from the receiver, when UDP is OFF, video can be played from a file.

Sorry, there is not yet a manual and yes, this command can be obscure.

73
Jean-Pierre F6DZP
F6DZP
 
Messages: 1129
Inscription: 24 Déc 2010

Re: Scan&Tioune

Messagede G4KLB » Mar 3 Nov 2020 18:40

I have a problem with some H265 video with Scan and Tune.

The video freezes after 2 seconds, I had the same issue when opening VLC separately, but fixed that by disabling hardware acceleration, but can't work out how to do this for the Scan and Tune display.

No problems with the normal MiniTioune program.
G4KLB
 
Messages: 32
Inscription: 07 Juin 2011

Re: Scan&Tioune

Messagede F6DZP » Mer 4 Nov 2020 06:46

Minitioune uses Directshow technology and codecs installed on your PC
demultiplexing is made by Microsoft demux that doesn't allow TS with bad Timing synchro => jerky video or sliced audio. (That happens often we People use amateur software)
Decoding quality depends of codec used.


Scan&Tioune uses VLC dll.
demultiplexing is made by VLC demux that , most of time, accepts TS with bad Timing synchro => less jerky video or sliced audio.
decoding is made by VLC decoders and their options.
I have not yet searched if we can disable hardware acceleration in VLC_dll_mode and how we can do that. Perhaps a new feature in the future..

Jean-Pierre F6DZP
F6DZP
 
Messages: 1129
Inscription: 24 Déc 2010

Re: Scan&Tioune

Messagede swlALAIN » Jeu 5 Nov 2020 10:26

Bonjour Jean-Pierre,

Au lancement S&T ce matin, j'ai reçu ce message d'erreur , peut-être problème de mémoire...(voir copie écran)
je précise que cela n'affecte en rien le bon fonctionnement du logiciel qui est toujours en cours d'utilisation depuis près de 2 heures ====>sans relance ni redémarrage.
Le balayage est tjrs actif.

Je vous signale aussi travailler avec un M-T-express, et ne pense pas que cela puisse provenir de cela.

Bonne journée

Cordialement, avec mes 73"s

SWL-ALAIN.
Fichiers joints
Capture d’écran 2020-11-05 102149.jpg
Capture d’écran 2020-11-05 102149.jpg (281.12 Kio) Vu 10055 fois
swlALAIN
 
Messages: 1
Inscription: 26 Fév 2019

Re: Scan&Tioune

Messagede F6DZP » Jeu 5 Nov 2020 11:06

Bonjour,

c'est un bug qui arrive parfois. Il n'est pas génant, à part l'apparition de ce message .Je suis à sa recherche...
Je pense avoir une piste: il me semble que c'est quand 2 stations disparaissent en même temps..
Le temps que je mette à jour la table des stations, il y a une thread en parallèle qui doit vouloir accéder à une info qui n'existe plus
bref, un petit problème de débutant.

Jean-Pierre F6DZP
F6DZP
 
Messages: 1129
Inscription: 24 Déc 2010

Re: Scan&Tioune

Messagede ON7KGK » Ven 6 Nov 2020 07:41

Bonjour JP,

J'ai un minitiouner pro1 qui marche à merveille donc 2 usb.
Le 1er usb est connecté à un portsdown (tout est dans la même boite pour faire du portable)
Est-ce que le 2ième usb je pourrais l'utiliser pour connecter un pc avec Scan&Tioune, (portsdown est éteint sur le 1er usb) ?

Je vois que swlAlain a pu télécharger S&T v0.2g mais je ne vois pas où il l'a trouvée.

Merci
73's de Michaël ON7KGK
ON7KGK
 
Messages: 11
Inscription: 06 Juil 2016

Re: Scan&Tioune

Messagede F6DZP » Ven 6 Nov 2020 20:30

non, ce n'est pas possible.

Jean-Pierre F6DZP
F6DZP
 
Messages: 1129
Inscription: 24 Déc 2010

PrécédenteSuivante
Forums Statistiques

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 2 invités

Options

Retourner vers MinitiounePro / Scan&Tioune / DualTioune

cron