Modulateur DVB embarqué sur le plutosdr. Embedded dvb modulator on plutosdr.

Re: Firmware DATV/QO100 pour plutosdr

Messagede PA0CDY » Lun 6 Avr 2020 08:55

F5OEO a écrit:Le firmware est en cours de finalisation. Voici le lien du téléchargement (béta) : aller dans la section téléchargement !
Ce forum est ici pour échanger autours de ce firmware.

Hello Evariste,
i use your software and made Eshail qso's with my freinds ,but i want to do dvbs2 on 145Mhz and the pluto stops on 325Mhz .
there is a youtube video how to change the frequency to lower 70Mhz ,my question ,can i do that without distroing your software and what is the best way to do that

good luck with all your projects
73,Peter PA0CDY
PA0CDY
 
Messages: 1
Inscription: 15 Juil 2014

Re: Firmware DATV/QO100 pour plutosdr

Messagede g0mjw » Mar 14 Avr 2020 16:29

It works for me.

Mike
g0mjw
 
Messages: 12
Inscription: 17 Juil 2011

Re: Firmware DATV/QO100 pour plutosdr

Messagede 4Z1ZV » Mer 10 Juin 2020 08:29

I installed the 10/10/2019 firmware from this site.

It works ON for DATV, however it will not work for the narrow band on SDR-Console.

I was told that other versions may work OK.

Any link to such version ?


Thanks

4Z1Zv
===========
Zvika 4Z1ZV
4Z1ZV
 
Messages: 6
Inscription: 21 Nov 2019

Re: Firmware DATV/QO100 pour plutosdr

Messagede mamado » Lun 6 Juil 2020 12:37

Hi every one.
thanks for this awesome frimware.
i give it a shot and it's fantastic.

i have one question about latency.
i'm trying OBS,VMIX,Gstreamer "command line" , and all three have latency around "2.8" second. recived with sdrangle and leansdr.

using corei7-7500 as transmitter and receive.

in OBS :
using default setting, get around 6 second latency . But when put "Key frame interval = 1" reduce latency to 2.8 second. this for both reciver sdrangle and leansdr.

in Gstreamer :
this is my command
gst-launch-1.0 v4l2src device="/dev/video2" ! video/x-raw,width=640,height=480 ! videoconvert ! x264enc pass=cbr tune=zerolatency bitrate=1000 sliced-threads=true speed-preset=1 vbv-buf-capacity=20 key-int-max=50 rc-lookahead=1 ! flvmux ! rtmpsink location='rtmp://192.168.2.1:7272/,437,DVBS2,QPSK,1000,34,0,nocalib,1,32, live=1'
also "key-int-max" is the major parameter to reduce Latency from 6 second to 2.8 second.

My question here Can i reduce this 2.8 second to less than one second ?

thank you again ^_^
mamado
 
Messages: 1
Inscription: 09 Juin 2020

Re: Firmware DATV/QO100 pour plutosdr

Messagede F4VSG » Jeu 9 Juil 2020 16:18

Hello to ALL,

After HamRadio 2019 i bought a Jetson Nano, great to use with my Mini-Lime.
It works great, nice H265 compression output with low latency.
Linux scripting is ‘difficult’ for me I am more an Analog radio-amateur.

After Evariste’s ADALM-Pluto Firmware I am using a PLUTO together with V-mix on a i7 laptop with great fun.
Easy to use for me, but only H264 compression.
After I found on the 06-07 post that there is also a Gstreamer solution with lower latency.

Now my question is there a way to send ffmpeg to the Jetson Nano as output from V-mix,
The Jetson Nano makes H265 and sends it to the Pluto.
Is this possible ??

Or are there more simple ways to have H265 compression ??
Already thanks for feedback.

Fb 73 Robert F4VSG
F4VSG
 
Messages: 1
Inscription: 01 Juin 2019
Localisation: Pont du Bois France JN37BX dept 70

Re: Firmware DATV/QO100 pour plutosdr

Messagede F6HJC » Ven 11 Déc 2020 07:29

Bonjour,
Suite a un mauvais flash de mon pluto, je cherche une solution pour le restaurer. J'ai entendu parler de JTAG ...
Quelqu'un a une info sur ce sujet.
73 de F6HJC
F6HJC
 
Messages: 4
Inscription: 02 Avr 2012

Re: Firmware DATV/QO100 pour plutosdr

Messagede F6HJC » Ven 11 Déc 2020 21:57

F6HJC a écrit:Bonjour,
Suite a un mauvais flash de mon pluto, je cherche une solution pour le restaurer. J'ai entendu parler de JTAG ...
Quelqu'un a une info sur ce sujet.
73 de F6HJC
F6HJC
 
Messages: 4
Inscription: 02 Avr 2012

Re: Firmware DATV/QO100 pour plutosdr

Messagede F1CHF » Sam 12 Déc 2020 08:41

bjr
je suis étonné de ne pas voir de réponse
ils doivent tous être sur le montage du sapin de noel !
je n'y connais rien mais cet article doit pouvoir t'aider
https://www.hb9afo.ch/articles/pluto/default.htm

good luck

le chf
F1CHF at FREE.FR
73's
F1CHF
 
Messages: 64
Inscription: 29 Déc 2010

Re: Firmware DATV/QO100 pour plutosdr

Messagede F6HJC » Sam 12 Déc 2020 10:13

Merci Christian


F1CHF a écrit:bjr
je suis étonné de ne pas voir de réponse
ils doivent tous être sur le montage du sapin de noel !
je n'y connais rien mais cet article doit pouvoir t'aider
https://www.hb9afo.ch/articles/pluto/default.htm

good luck

le chf
F6HJC
 
Messages: 4
Inscription: 02 Avr 2012

Re: Firmware DATV/QO100 pour plutosdr

Messagede DreuxPomerleau » Mar 29 Juin 2021 14:43

Bravo pour ce boulot et merci à vous qui ont répondu. C'est vraiment cool. :)


comment faire un compte onlyfans et commencer à gagner de l'argent voici nos tutos
Dernière édition par DreuxPomerleau le Dim 14 Nov 2021 09:27, édité 1 fois.
Pour les adeptes de Onlyfans voici => comment créer un compte onlyfans
DreuxPomerleau
 
Messages: 7
Inscription: 18 Juin 2021

PrécédenteSuivante
Forums Statistiques

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 4 invités

Options

Retourner vers PlutoDVB