vivadatv.org

Hi,

after running v0.9.9.1h succesfully, I tried the i-version which should be the same as the h-version except the detection of another new tuner hardware.
But in this case I would say, that the version broke something.

- My Digole 1,4" shows no tuning and signal information anymore
- I have to switch from F plug A to B and back to A to get a signal

TestMyMiniTiouner v2.5 works well and shows no errors...

73, Thorsten

Hello,

Thank you very much Thorsten for this info.
I will fix this , but could you confirm which kind of MiniTiouner you use? (V2 or Pro, Pro2...) ?

73
Jean-Pierre F6DZP

F6DZP a écrit:I will fix this , but could you confirm which kind of MiniTiouner you use? (V2 or Pro, Pro2...) ?

Hi JP,

it is a Minitiouner Pro2 from R.E.F. (https://boutique.r-e-f.org/kits-et-comp ... c-nim.html)...

73, Thorsten

Hello Thorsten,

Last week I was traveling.
I am back home and can now test Minitioune version 9.9.1i

I have not the same result as yours:
-using a MiniTiounerPRO v1 or a MiniTiouner V2 ==> LCD works well
-using a MiniTiounerPro V2 LCD is not active. OK there is a problem. I will fix it

But always, my MiniTioounerProV2 start well using Fplug A, so I cannot reproduce this issue, so can't fix it surely.

73
Jean-Pierre f6DZP

I think the version 0.9.9.1j fix the problem.
I have sent to you a link to test it.

Jean-Pierre F6DZP

F6DZP a écrit:I think the version 0.9.9.1j fix the problem.
I have sent to you a link to test it.

Hi JP,

thanks for the fix.
Confirmed, all working well again

73, Thorsten