All about the software

Hardware Incompatible, we quit

Postby ik8ozv » Tue 5 Nov 2019 13:56

Here i am again with the Hardware Incompatible.
I have stored my Minitiouner Pro2 as i was waiting for the Box and for the Display.
Today i have received the Box and the Display and i wanted to assembly.
I have plugged the Minitiouner into the USB port, the one nearest the NIM,
connected the Dish to the Upper connection of the NIM and gave the 12V.
Tried to run the program MiniTioune_V0_9beta8_9.exe but nothing happens.
After a couple of seconds i get the warning "Incompatible Hardware, we quit"
I click on the "OK" of the warning window, it closes the Warning window and
after a couple of seconds i see a flash of the program that opens and closes.
I have also tried to connect the Display but not even it ligth's up.
Am i missing something or i got again problems with the Minitiouner?
I have also tried to run the program CheckMiniTiouneDriverAndFilters_V0_5a.exe
and run all the checking that gave me all positive results.
Please any help will be really appreciated.
73's de Enzo IK8OZV
MinitunerPro2, NIM: FTS4334; Parabole 100cm Offset, LNB Octagon Green.
PC= I9 / Win10-64bits.
Posts: 26
Joined: 04 Aug 2019

Re: Hardware Incompatible, we quit

Postby F6DZP » Wed 6 Nov 2019 06:40

as usual, I can say nothing if you don't give the screen capture of what says "TestMyMiniTiouner" ( the beginning of what is written in the white panel).

First test to do also is to discard all other USB hardware you have plugged in your computer, plug ONLY the Minitiouner and try Minitioune: there can be an incompatibility with another hardware.

Jean-Pierre F6DZP
Posts: 987
Joined: 24 Dec 2010

Forum Statistics

Who is online

Users browsing this forum: No registered users and 1 guest


Return to Minitioune