All about the software

E-Tiouner from ELAD

Postby DL9SDL » Sun 17 Dec 2023 22:22

I tried to run on the same software V. on which I have running the original minitiouner since years to run a new ELAD e-tiouner. The software on the PC comes up with the same look an feel , but the setting buttons for the power supply of the LNB´s is grey and cannot be set. Even by supplying via a Bias-T with 18V to the LNB, there is no RX-signal coming in.
What´s the difference to the former Minitiouner I bought in the DARC shop.

Please help, tnx and 73, DL9SDL, Helmut :)
Posts: 1
Joined: 16 Feb 2019

Re: E-Tiouner from ELAD

Postby funkipz » Sun 7 Apr 2024 16:05

I don't know, if the problem actually exists. I solved it by taking off the jumper from one channel inside the housing. So 0 Volt are at output. Then I took a bias-T to provide the 18V to the LNB. It works.

73 de Peter, DL3VPZ
Posts: 1
Joined: 25 Mar 2024
Location: JO60VX

Forum Statistics

Who is online

Users browsing this forum: No registered users and 1 guest


Return to Minitioune