Double receiver DVB-S/S2 144Mhz-2450Mhz
build it yourself or buy a complete MiniTiounerPro already built for less than 100 euros

MiniTiouner software don't autodetect the PRO

Messagede pascalw » Mer 31 Oct 2018 09:55

Hello,

I have recieved a MiniTiouner Pro from REF.
But I have a problem the MiniTiouner software isn't detecting the "PRO" it shows only 1 reciever windows.
I have connected both USB cables, I also tested the board with the TestMyMiniTiouner_V2_0a software and al the test are running fine ( also the AUX Usb tests )

Do I need to config something in the software ?

73
pascalw
 
Messages: 1
Inscription: 23 Sep 2018

Re: MiniTiouner software don't autodetect the PRO

Messagede F6DZP » Sam 3 Nov 2018 08:16

hello,

When you start Minitioune, it says that it is a MiniTiouner Pro.

But Minitioune works only as a one frequency at a time receiver.

There is another software called Dualtioune that can work 2 frequencies at same time.
This software is actually beta tested and will be available next month.

73
Jean-Pierre F6DZP
Dernière édition par F6DZP le Sam 10 Nov 2018 15:32, édité 1 fois.
F6DZP
 
Messages: 716
Inscription: 24 Déc 2010

Re: MiniTiouner software don't autodetect the PRO

Messagede G4KLB » Ven 9 Nov 2018 17:30

I had the same question.
looking forward to trying Dualtioune when its released.


IMG_207.jpg
IMG_207.jpg (333.43 Kio) Vu 135 fois


IMG_221.jpg
IMG_221.jpg (369.97 Kio) Vu 135 fois


IMG_320.jpg
IMG_320.jpg (268.81 Kio) Vu 135 fois
G4KLB
 
Messages: 31
Inscription: 07 Juin 2011

Forums Statistiques

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 1 invité

Options

Retourner vers MiniTiouner Pro