Page 2 sur 3

Re: MiniTiounerPro2 et écran Digole

MessagePosté: Sam 19 Oct 2019 12:15
de F6FCD
F6DZP a écrit:finalement l'Oled fonctionne. c'était quoi le problème avec lui?

Jean-Pierre F6DZP


Bonjour J.Pierre,
Au final, je ne sais pas.... je l'ai laissé câblé sur JP3 et à un re-démarrage, la lumière est entrée...
cordialement,
Lionel

Re: MiniTiounerPro2 et écran Digole

MessagePosté: Jeu 31 Oct 2019 11:43
de F6FCD
Bonjour,
La société Digole m'avait promis un remplacement de mon écran, je viens de le recevoir et câblé sur le récepteur
ça y est, ça fonctionne sur le port JP3 du MinitiounerPro2.
Il me reste a mettre une autre face avant, je mettrai une photo.
Lionel

Ps : Pour info, la référence de l'écran est : DS320240CIPS-66TF(CN)

Re: MiniTiounerPro2 et écran Digole

MessagePosté: Ven 1 Nov 2019 05:01
de F6FCD
Bonjour,
Ci-dessous mon nouveau coffret avec l'écran 2.6" de Digole.

Re: MiniTiounerPro2 et écran Digole

MessagePosté: Ven 27 Déc 2019 08:25
de hb9nbi
Bonjour à tous. Donc, avec l'écran LCD ou TFT Digole, vous devez vous assurer qu'ils sont bien soudés. Je travaille dans un atelier d'assemblage SMD mais les joints de soudure laissent à désirer. Avant d'insérer cet écran LCD ou TFT, j'ai soudé tous les joints de soudure pour des raisons de sécurité. Mieux vaut prévenir que guérir. Vy 73 de Andreas HB9NBI.

Re: MiniTiounerPro2 et écran Digole

MessagePosté: Mer 29 Jan 2020 19:57
de ik8ozv
F6FCD a écrit:Bonjour,
Ci-dessous mon nouveau coffret avec l'écran 2.6" de Digole.


Hello,
i saw your case that it seems it is the same as mine one.
I like the layout of the LCD the Switch and the LEDs.
Please doi you have a layout that i can copy and make the panel as your one?
Or can you send me the measurements?
Merci'
Enzo IK8OZV

Re: MiniTiounerPro2 et écran Digole

MessagePosté: Jeu 30 Jan 2020 07:29
de F6FCD
Hello Enzo,
I do not have a layout of my front panel, but in order to be pleasant, I can make measurements, and send them to you
or dispose here on the forum, may be it can help other builders.
73, Lionel

Re: MiniTiounerPro2 et écran Digole

MessagePosté: Jeu 30 Jan 2020 08:17
de ik8ozv
F6FCD a écrit:Hello Enzo,
I do not have a layout of my front panel, but in order to be pleasant, I can make measurements, and send them to you
or dispose here on the forum, may be it can help other builders.
73, Lionel


Hello Lionel,
i will really appreciate it.
Merci
Enzo IK8OZV

Re: MiniTiounerPro2 et écran Digole

MessagePosté: Jeu 30 Jan 2020 08:46
de F6FCD
I tried since last message to do my best, please find attached jpg front panel.
Done with "libre office draw", I can send you original file in odg format, let me know and email adress via MP.
Face_AV_Minitiouner.jpg
Face_AV_Minitiouner.jpg (24.13 Kio) Vu 15691 fois

Re: MiniTiounerPro2 et écran Digole

MessagePosté: Jeu 30 Jan 2020 08:52
de F6FCD
Enzo,
Found your adress on Qrz.com
Just sent you my original files.
73, Lionel

Re: MiniTiounerPro2 et écran Digole

MessagePosté: Ven 26 Juin 2020 06:46
de FR4LI
Bonjour à tous , Mon Minitiouner est en cours de construction, je souhaite rajouter deux écrans Digole 2.6 sur la face avant. J ai parcouru le web pour trouver la partie qui habille le pourtour de l écran Digole afin de faire un produit fini ,mais en vain . Qui aurait une idée où trouver où commander cela ?

For English Om.
Hello everyone, My Minitiouner is in progress. I would like to add two Digole 2.6 screens on the front panel. I surfed the web to find the part that covers the edge of the Digole screen to make a finished product, but to no avail. Who would have an idea where to find where to order this?

Par avance merci
Nicolas Dhiver
FR4LI