Page 1 sur 1

Error loading

MessagePosté: Dim 16 Oct 2016 13:33
de G4KLB
I have a problem with my Windows 10 PC when loading MiniTioune.
Have reloaded everything I can think of, but not resolved the issue, Everything works on my Windows 10 laptop, A complete reinstall of Windows 10 would fix the problem but that is the last resort.

Many thanks

error.jpg
error.jpg (105.5 Kio) Vu 28972 fois

Re: Error loading

MessagePosté: Lun 17 Oct 2016 08:18
de F6DZP
Hello,

Windows 10 has no codec.
I think that if you just install LAVfilers, all will be going well.

Jean-Pierre

Re: Error loading

MessagePosté: Lun 17 Oct 2016 22:19
de G4KLB
Thanks, will try installing the LAVfilers again.

That was the first thing I tried, then reinstalled the codec pack as well.

Looks as if I'm looking in the right area.

Re: Error loading

MessagePosté: Mar 18 Oct 2016 16:54
de G4KLB
This is the other Error I get, Its only displaying the video that is a problem, I think my windows files are corrupt, so will have to reload windows to fix it.

E2.jpg
E2.jpg (386.27 Kio) Vu 28937 fois

Re: Error loading

MessagePosté: Mar 18 Oct 2016 17:46
de F6DZP
Hello

Could you try the Minitioune version 0.3b or 0.3c to see if you have similar result?

Jean-Pierre

Re: Error loading

MessagePosté: Mer 19 Oct 2016 21:20
de G4KLB
Yes, the same with any version.

2b.jpg
2b.jpg (215 Kio) Vu 28925 fois

Re: Error loading

MessagePosté: Lun 24 Oct 2016 22:46
de G4KLB
I have traced the problem to a faulty graphics card, so should be fine when the new one arrives. :D
Never had a problem with any version until it went faulty.

Re: Error loading

MessagePosté: Mar 25 Oct 2016 14:39
de G4KLB
New graphics card fitted this morning,
Everything is working now :D :D :D :D :D

OK.jpg
OK.jpg (779.5 Kio) Vu 28852 fois

Re: Error loading

MessagePosté: Ven 28 Oct 2016 05:25
de F6DZP
Well, you have the solution.
I think that it is more the new driver for the graphic card than the new graphic card itself that correct your problem.
Some graphic cards have bad driver that doesn't allow to use a "Video Mixing renderer" after the decoder, but only a simple "renderer"
I suppose this the issue that you had.
Tutioune/Minitioune software uses a Video mixing renderer.
Using a graphic card X, if you use a generic Windows driver, you will not access to a "Video Mixing renderer".
So we absolutely need a good/recent specific driver for the graphic card.

Jean-Pierre